Test Instrumentation

"WACO" Digital Earth Resistance Tester is direct replacement of the conventional hand generator type 

tester. It is designed for measurement of the resistance of earthing used in the electrical equipment as well as for measurements of ground resistivity. It can also be used for  measurements of the other low 

regular and liquid resistance. This Instrument finds wide application for testing earthing installations in 

power based industries, telecommunication net-works and electrical traction systems, etc.  This is powered by rechargeable Nicd Cells, A LCD low battery  indication appears when its battery goes down, which can be recharged goes down, which can be recharged  by connecting Mains AC Supply through Charging Leads provided with the instrument. It has 3 ½ digit Liquid Crystal display.  Its dimension are 165 x 50 x 95  mm, and weight approx 750 gms. Having measuring range 0-10-1000 ohms

Features 

• 4 wires earth measurement 

• Soil Resistivity measurement 

• Conductor resistance measurement 

• 3 ½ Digit LCD Display 

• Rechargeable NICD Batteries 

• 3¾ DIGIT MULTIMETER
• 3,999 COUNT
• AUTO POWER OFF
• DATA HOLD, MAX/MIN
• NCV
• TRUE RMS
• hFE TEST
• DUTY CYCLE
• AUTO RANGE

POWER : H185 x W93 x D35 mm
Dimension : H185 x W93 x D35 mm
Weight : Approx. 290 Gms.
Accessories : Test Leads, Sheath, TP01 Thermocouple, Manual

• • Basic dc accuracy
  • Digital display to 4,000 words
  • Automatic and manual range
  • Display hold function
  • Diode and continuity test with buzzer
  • Cover designed for easy hanging
  • Category safety rating IEC 1010-1 CAT I 1000 V, CAT II 600 V, CAT III 300 V
  • Automatic shutdown
  • Easily replaceable battery design
  • One-year warranty
  • 500 hours battery life
  • Voltage AC, Voltage DC, resistance, capacitance, continuity beeper, diode test, A ac, A dc all in a durable holster
  • Rugged and durable design - all inputs, ranges and functions are protected up to 1000 V
  • Batteries and user's manual included

   

• 320 x 240 resolution
• 2 meter drop test
• IR Fusion™ technology for context
• Fixed focus
• Measure up to 400 °C
• Subject to Export Control

The Armature Growler Tester is used for detecting the turn short, slot by slot with the aid of sensing probe.
 
The Tester is made by using very high quality raw material which ensures high durability at its user end.

These armature growler tester are widely finds its application in industrial and commercial sectors.

Features:
1. Armature Dia: 20mm to 100 mm
2. Available for higher ratings motor
3. Durable
4. Easy to use
5. Volts220/230

Description:

• Hand held pocket type anemometer
• Measures Air Speed, Air Flow (CMM/CFM)
• Low Battery and Over range indication
• Data Hold, Max / Min record function
• 4 Digits Backlit LCD Display with analogue barograph
• Range of Wind Speed: 0.8 to 40m/s with an accuracy of ±2%
• 0.8 to 77.70 knots with an accuracy of ±2%
• 1.4 to 144.0 km/hr with an accuracy of ±2%
• 1.3 – 131.20 ft/s with an accuracy of ±2%
• 0.90 – 90.00 mil/h with an accuracy of ±2%
• 78 – 7874 ft/min with an accuracy of ±2%
• Range of Air Flow: 0 – 99990 CFM / CMM / 9999 CMS

• Accumulative dosimeter for personal use
• Independent calibration
• Fast reading in a couple of second
• Data logging record first, playback later
• Large display provide more information
• Adjustable backlight and contrast
• GMC data viewer iOS App
• Open protocol
• Swivel display

• Contact-type Digital Tachometer with Adaptors
• Last Value, Max Value and Min Value memory
• Exclusive One-chip microcomputer LSI Circuit
• Quartz Crystal Time Base
• Display 5 Digits LCD
• Range 60 to 49,999 RPM
• Surface Speed 6 to 5000 m/min
• Resolution 0.1RPM up to 1000 RPM thereafter 1 RPM – 0.01m/min up to 100m/min thereafter 0.1m/min
• Accuracy ±0.05%
• Complete with carrying case, RPM Cone Adaptor, RPM Funnel, Adaptor, Surface speed test wheel and operation manual

• 3 5/6 Digits
• 6000 Counts
• TRMS
• Auto Ranging
• AC Current upto 600A
• DC Current upto 600A
• AC Voltage upto 600V
• DC Voltage upto 600V
• Capacitance upto 60mF
• Frequency upto 1MHz
• Duty Cycle 0.1% ~ 99.9%
• Resistance upto 60MΩ
• Temperature
• Audible Continuity
• Diode Test
• Data Hold
• Backlight Display
• Torch Light for Clamp
• NCV (LED, Buzzer & EF Strength)
• Auto Power Off
• Low Battery Indication
• Jaw Opening : Cable Dia. 25mm (max.)

• AC Current Range: 0 – 400A
• AC Voltage Range: 0 – 600V
• DC Voltage Range: 0 – 600V
• Resistance Measurement: 0 – 4000Ω
• Display Type: LCD with backlight
• Jaw Opening: 25 mm
• Safety Category: CAT III 600V
• Power Supply: 2 x AAA batteries

• Tests the Temperature of environment
• Probe Connected With Multimeter Jack
• Range : -40˚C~260˚C Length : 1000mm

Vibration Tester AVD -80 Micro Controller Based has been designed as simple diagnostic tool for preventive maintenance. The instrument and the monitoring technique are based on the recommendations of ISO standard. Need based maintenance is the latest trend of industry with which maintenance costs are low and life machinery is most optimum. Condition monitoring is basic need for need maintenance.

All three useful measurements are possible. Suitable for monitoring machinery vibration caused by imbalance, misalignment and gear faults. Displacement, Velocity and acceleration modes allow a user to perform basic vibration analysis
Features

• Measuring Vibration: Displacement , Acceleration and Velocity
• True RMS measurement &Peak-Peak
• Sealed Membrane key pad
• Micro Controller based
• Back Light Display
• Auto Off
• Battery Low Indication
• Pocket size and Light weight

Standard Supply :

• 1) Vibration Tester AVD-80 with Pouch,
• 2) Vibration Transducer (Accelerometer) VSF-1F, Magnetic Base, Hand Held Probe Rod, Low Noise Cable with Connectors (1.5 Mtrs)
• 3) Manual,
• 4) 9V Battery (Alkaline),
• 5) Test & Calibration Report with Warranty/Guarantee Certificate
• 6) Carry Case.

• Digital Anemometer with Air Flow and Infra Red Temperature Measurement Facility
• Simultaneous display of Air Temperature and Velocity
• CFM / CMM Thermo-Anemometer + Infrared Thermometer
• Max / Min / Avg value measurement
• Low battery indication and Auto power Off
• Simultaneous display of air flow or air velocity with temperature
• Easy to set Area dimensions
• 20 point average for Air Flow
• Super Large Backlit LCD Display
• Range of Wind Speed in m/s: 0.40 to 30.00 m/s with an accuracy of ±3%
• Range of Wind Speed in km/h: 0.4 to 108.0 km/h with an accuracy of ±3%
• Range of Wind Speed in ft/min: 80 to 5900 ft/min with an accuracy of ±3%
• Range of Wind Speed in mph: 0.9 to 67.0 mph with an accuracy of ±3%
• Range of Wind Speed in knots: 0.8 to 58 knots with an accuracy of ±3%
• Range of Air Flow in CMM: 0 to 999999 CMM with an Area of 0-999.9m²
• Range of Air Flow in CFM : 0 to 999999 CFM with an Area of 0-999.9ft²
• Range of Temperature : -10°C to 60.0°C / 14.0° to 140.0°F
• Accuracy:  ± 2°C / 4°F
• Infra Red Temperature Range:  -50°C to 260°C / -58° to 500°F
• Distance to Sighting Ratio:  8:1

FEATURES

* Large LCD display, easy to read.

* Max. Hold function for stored the maximum value on display.

* Frequency weighting networks are designed to meet the IEC 61672 CLASS 2.

* Warning indicator for over and under load

* LCD display for low power consumption & clear read-out even in bright ambient light condition.  

* A & C weighting networks are conformity to standards

* Time weighting (FAST & SLOW) dynamic characteristic modes.

* Used the durable, long-lasting components, including a strong, light weight ABS-plastic housing case.

* AC/DC output for system expansion.

* Build in adj. VR is available for easy calibration.

* Small and light weight design allow one hand operation.

* Condenser microphone for high accuracy & long-term stability.

* Low battery indicator.

Digital Vane Anemometer Lutron AM-4222
Features:

• Anemometer, Temperature meter, two in one, professional.
• Anemometer unit : m/S, Km/h, FPM, mph, Knot.
• Temperature measurement with ?, ? unit.
• Vane anemometer, available for air velocity measurement, high reliability.
• Two display show air velocity and temperature value at the same time.
• Bright LCD display.
• Microprocessor circuit ensures high accuracy and provides special functions and features.
• Records Maximum and Minimum readings with recall.
• Auto power off saves battery life.
• Operates from DC 1.5V ( UM4/AAA ) x 4 PCs batteries.
• Low-friction ball vane wheels is accurate in both high and low velocities.
• Durable, long-lasting components, enclosed in strong, compact ABS-plastic housing.

• °C/°F Function
• Super Large LCD display with baclight
• Reading the Air Velocity & Temperature same time
• Thermistor sensor for Temperature measurement, Fast Response time.

Power : 9V (6F22) x1

Standard Accessories : Anemo Probe, Carrying Case, Manual, Power Adaptor

Dimension : 210(H) X 75(W) X 50(D)mm

The MECO 970P is a compact and reliable digital sound level meter (SPL meter) designed to measure noise and sound intensity in various environments. It is widely used in factories, offices, environmental studies, construction sites, and audio installations for accurate sound level monitoring.

Technical Specifications:

• Measurement Range: 35 dB ~ 130 dB (31.5 Hz ~ 8 kHz)

• Accuracy: ±1.5 dB

• Resolution: 0.1 dB

• Functions: MAX / MIN / HOLD, Auto Power-Off

• Power Supply: 9V Battery (included)

• Dimensions: Approx. 172 × 56 × 39 mm

• Net Weight: Approx. 144 g (including battery)

• Accessories: Carrying Case, Instruction Manual, 9V Battery

Features:

• Memory for 32,700 readings
• LCD to show logging information easily
• Free selectable measurement cycle from 1sec to 24 hrs
• Battery life: more than 3 years (Under Ideal condition at 22Oc)
• Display all status for Alarm and Record through 2 LED's
• Alarm display if user-defined max/min values are exceeded
• Analysis software used to view graphically or text mode for logging data USB Computer Interface (Advanced Software Program for all windows)

• Standard Accessories :Holding Case, Safety Lock USB Cable with Software
• Dimensions : 94.8(H) X 51.4(W) X 29.5(D)mm