Test Instrumentation

Usage/Application	petroleum industries, biogas plants etc
Model	Wet Type, SGS 24
Line Size	12mm dia
Power Supply	230V AC, Single Phase, 50 Hz
Availability	In StockWet gas meter For continuous development the above technical specification & design, SGS reserves rights to change without any prior notice.

• Aluminium alloy load frame giving high strength and stiffness.
• Fully digital tensile testing system with high precision control and accuracy, includes automated computer control of test methods giving simplicity of operation.
• High resolution auto ranging load cells with accuracies better than +/-0.5% down to 1/1000th of the load cell capacity
• Automatic recognition and calibration of load cells and extensometers, with instant calibration check facility.
• 800% overload capability of load cells without damage
• Small footprint design, giving economy of bench and floor space.
• High efficiency pre-loaded self cleaning ballscrews for fast, quiet testing. Fitted with sealed for life lubricated end bearings.
• Crosshead guidance system providing precise alignment and smooth running.
• Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free operation and 4,000,000 steps per revolution positional control.
• High speed data collection systems for up to 4 synchronous channels.

• ASTM D 434
• ASTM D 1578
• ASTM D 5034
• ASTM D 5035
• BS 1610
• BSEN 1002 – 3
• DIN 51221

• The Capacity of Tester: 500 Kgf. (Accuracy: 100gm)
• S Type Load Cell fixed with Top Grip
• Traverse Speed: 300 & 500mm /min. (Adjustable)
• Variable Speed Models are also available
• Max. Grip Separation: 1000 mm
• Min. Grip Separation: 25 mm
• Top Grip is fixed and Bottom Grip is Movable Type
• Elongation measurement by Steel Scale and Digital Counter Meter Both
• Digital Display of Load and Elongation
• Peak Value of the Last test can be read on memory
• User-friendly key panel with switch of Zero setting and peak value of the last test
• Motor: 1 HP Single Phase 220 V 50 Hz
• Power: 220 V AC 50 Hz
• Safety Device: By Limit Switch to protect from Over Traverse

1) The main unit and probe are integrated so it is easy to operate.

2) Adopts microcomputer technology, large LCD display.

3) High performance, high-capacity battery, no external power supply required, low voltage display, sustainable measurement is suitable for outdoor measurement.

4) You can measure large leaf area (78.7 x 6.1 inches (2,000 x 155 mm2) at a time.

5) It can record 5,000 sets of data (leaf area, leaf length, leaf width).

6) It can measure various parameters of leaves, such as leaf areas, average leaf areas, leaf length, leaf width.

7) Built-in calibration module, user can calibrate according to the usage environment

8) Communication interface: Type-C interface, you can import data to your computer.

If you're searching for an effective and efficient solution to detect and diagnose leaks in your vacuum systems, you've reached to the right place. A Vacuum Leak Tester is a tool used to detect leaks in containers, pipes or other sealed systems by creating a vacuum inside the system and then measuring the pressure. It is capable of helping find leaks in a wide range of systems, including pipelines, sealed enclosures, vacuum systems and boxes. The tester typically consists of a vacuum pump, a gauge to measure pressure, and a hose or connector that attaches to the system being tested. To remove the air from the system, a vacuum pump is turned on and the system is sealed. The gauge will then display a drop in pressure, which will tell if there is a leak in the system. It is used in the manufacturing sector to make sure that containers are effectively sealed and do not leak prior to when they are loaded with products, such as food, beverages, and prescriptions.

-Vacuum level: 50-650 mm of HG at MSL.
-Timer: 0-999 seconds (other on customer request).
-Digital read-out LCD display.
-Vacuum chamber: Polycarbonate available in 150/200/300mm diameter sizes.
-Inbuilt printer for test reports(Optional).
-Power supply: 220V AC, 50Hz.

*Also available in a touch screen model.

SALIENT FEATURES

Digital control with LED display.

5 recycle digital timer, 90, 180, 280, 380 , 480 seconds.

Overheating protection function.

Degas function available to improve cleaning efficiency.

Built-In cool fan for steady and safe working.

Detachable power cord.

LPG detectors (propane + butane)

LPG is an explosive hydrocarbon gas consisting of butane and propane. It is heavier than air and sinks to the floor in case of leakage. Therefore, the gas detector should be placed 15-25cm above the floor and within 1-2m horizontally within the range of possible gas leakage. REAL SAFE gas detectors respond audibly and visually before the leakage reaches 20% LEL. Detectors have microprocessor-based design.

Natural gas detectors (methane)

Methane is an explosive hydrocarbon gas. It is lighter than air and rises to the ceiling in case of leakage. Therefore, the gas detector should be placed 5-15cm below the ceiling and within 1-2m horizontally within the range of possible gas leakage. Real safe gas detectors respond audibly and visually before the leakage reaches 20% LEL (Lowest Explosion Level). Detectors have microprocessor-based design

Dart Impact Tester is used to determine the impact of load on a plastic film under specific conditions to analyze the effect of a free-falling dart. It is widely used in plastic film industries for judging the strength and stability of the plastic films and similar products. Related standard ASTM D1709-16A

The machine is equipped with a clamp having 127mm diameter from inside.

Heights of fall can be set on the scale 660mm & 1524 mm (adjustable as per standard)

Diameter of dart head:  A- 38mm & B- 50.8mm ± 0.13mm

Dart weight: 50 grams to 900 grams with incremental weights of 5 grams.

It is equipped with a digital counter & in-built vacuum pump.

Electromagnetic dart release mechanism.

the michelson interferometer is a common configuration for optical interferometry using a beam splitter, a light source is split into two arms. Each of those light beams is reflected back toward the beam splitter which then combines their amplitudes using the superposition principle

the michelson interferometer is a superb instrument for measuring the optical properties of a medium.
e. G. Refractive index, phase shifts, visualization of interference
specifications:-

michelson interferometer based on model developed by hilger & watts (london)it is divided into two parts.

(1) mechanical
(2) optical mechanical part consists of following items
a) bed: bed is optically ground, length 250mm
b) lead screw: lead screw is optically ground with its nut, length 200 mm pitch 1 mm
c) optical mirror mount: kinematic mirror mounts are to hold the mirror which be aligned in to orthogonal direction by means of screws provided at the rare of the mount.

optical parts consist of the following items:
a) beam splitter
b) compensating plate size 45mm× 32mm × 8mm 50mm× 35mm × 8mm beam splitter and compensating plates are covered from the same optically worked glass plate
surface flatness : λ/10 (both faces)

parallelism : 5 arc sec.
mirrors : 2nos.
focal length : 25mm thickness 10mm
front surface : coating material : coated ai with sio2
l. C. Of instrument :10¯4mm
tag:

Applications of Seed Blowers :

• We offers well reckoned Dakota Type Seed Blower
• Used for purity docking & cleaning of grains.
• Used for cleaning of seed samples by accurately controlling the air flow
• Effective for small lots of seeds

Salient Features & Construction of Seed Blowers :

• Dakota Seed Blower utilizes airflow through a column generated by a blower-motor combination
• Balanced suitable blower fitted in the table, made of seasoned wood
• Controlled Air flow
• Fitted with caster wheels for portability
• Transparent Columns are made to trap light weight seeds and chaff
• Only pure and clean seed remains at the bottom of the column.
• Supplied with 3 sets of columns for covering the entire range of seeds/grains
• Large tube set :for larger capacities and for grasses, legumes, grain, corn, soybean etc.
• Small tube set : for brome, red top, blue grass, legumes, small cereal grains etc.
• Robust, Fast & Mobile
• Wire mesh bottom prevent seed falling into fan
• Manually operated or through timer along with all other controls.