Test Instrumentation

Description:
The Purity Tester consists of a caustic reservoir
and calibrated absorption burette mounted to a
PVC polished frame. The reservoir and burette
are held to the frame with two neoprene covered
mounting bands that are adjustable from the rear
side of the frame. The absorption burettes are
available in five different calibrations, with the
standard burette graduated in tenths of one
percent, the total being one percent of the
volume of the burette. The caustic reservoir
(10100) has a line indicating the level to which caustic solution should be added, which volume is slightly in excess of the
capacity of the absorption burette.

 

The volume of gas in a container, such as a cylinder or a canister, can be measured using a tool called a Gas Volume Tester. A pressure gauge, temperature sensor, and volume calculator are included in the tester. The volume calculator applies the Ideal Gas Law (PV=nRT) to determine the volume of gas in the container based on the measured pressure and temperature. Several industries, including the gas and oil, manufacturing, and medical gases sectors, use gas volume testers. Before a cylinder is filled with product, it is used to measure the amount of gas inside to make sure it is not over or underfilled. It is also used to check the volume of gas in a cylinder after it has been filled and to ensure that the cylinder is not leaking. To ensure that medical gases like oxygen, nitrous oxide, and carbon dioxide are filled to the right volume and are contamination-free, the gas volume tester is used in the medical gas industry.

 

-Multi-Purpose can be used for PET, Glass or Cans.
-Maximum Bottle diameter: 110mm.
-Maximum Height: 400mm.
-Pressure Range: 0 - 7 kg/cm2 & 0 - 100 PSI (other on request).
-Thermometer: Digital Type with dual output °C/°F.
-Material of Construction: Stainless Steel 304.

-Material of Construction of pressure Gauge: Complete Stainless Steel 304.

 

Gas volume testers are used to measure the volume of gas produced by a substance. This measurement is essential in a variety of industries, including oil and gas, food and beverage, pharmaceuticals, and environmental monitoring. Gas volume testers enable manufacturers to ensure that their products meet the required specifications and standards and are reliable and safe.

In this article, we will discuss the importance of gas volume testers, who should use them, and the key factors to consider when purchasing one.

 

Features:

• 3 ½ Digits LCD Display
• 1999 Counts
• Backlight
• Data Hold
•  Auto Ranging
• 3 in 1
• Insulation Resistance
• Phase Testing
• Voltage Testing

Standard: ASTM D2584, ASTM D5630, ISO 3451

Scope: An Ash test is used to determine if a material is filled. The test will identify the total filler content. It cannot identify individual percentages in multi-filled materials without additional test procedures being performed. An ash test cannot be used to determine the percent carbon fiber or percent carbon black since carbon burns off during the Ash test.

Procedure: An Ash test involves taking a known amount of sample, placing the weighed sample into a dried / pre-weighed porcelain crucible, burning away the polymer in an air atmosphere at temperatures above 500°C, and weighing the crucible after it is has been cooled to room temperature in a desiccator. Ash residue remaining in the crucible is considered filler unless the residue is less than 1%. Residues of less than 1% are typically the result of additives that did not burn off.

 

Data: The Ash test result is expressed as % ash. A magnified optical examination of the ash residue is performed to determine if the ash is glass, mineral, or a combination of both. The total ash content equals the weight of the ash divided by the weight of the original sample multiplied by 100%.

Tensile Testing Strength Tester is electrically operated and is used to check the tensile strength. The accuracy of the machine is with in permissible limits as par IS:1828. The test specimen is held between two grips. The elongation is measured as the displacement. Models available from 10 kg-f to 5000 kg-f.

-Max. Capacity: 10/250/1000/5000kg-f (other on request).
-Readability/Least count: 0.001/0.01/0.1/0.1Kg-f.
-Accuracy: ± 0.1%.
-Peak hold locking.
-Units available in Kg & N.
-Maximum Traverse between grip to grip: 1000 mm (other on request).
-Grips inclusive as per the test specimen.
-AC drive for variable speed (Optional).

Specifications(Computerized):
-Computerized interface will allow you to see the breaking point value compressive length, graph for breaking point, Max. & min. Load value, Elongation etc.
-Company name, batch no., date & time, test no. etc. will be indicated in the report & can be saved in the computer for future.
-Latest version laptop & printer is included in this offer along with preinstalled genuine software you will work on.
-You can email/print test reports through software.
-Tensile testing machine will be fully operated through computer & all test results will be saved in system memory automatically.
-Graph between load-elongation/time-load.

*Touch screen model also available.

Puncture resistance tester is used to determine the resistance of paper, paper board & similar product. Various packaging materials and boxes are prone to damage by puncture during transfers and handling. So, durability of packaging material can be analysed by the parameter of puncture resistance. This equipment tests various material like paper, boards to determine the resistance to puncture. Related Standard ASTM D781.

 

Energy range of weights: 6, 12 & 24 Joules per meter.

Accuracy: ±1% of full range.

Release angle of pendulum: 90º

Pendulum release mechanism: Manual.

Power supply: 220 Volts AC, Single phase 50 Hz.